ELECTRICAL SPEC. |
|
Detection System |
Incremental ¼W¶q«¬ |
Output Wave ¿é¥Xªi§Î |
Square Wave ¤èªi |
Stroke (mm) ¶q´ú¦æµ{ |
200, 500, 1000 |
Standard Resolution (mm/pulse) ¸ÑªR |
1, 0.5, 0.2, 0.1, 0.04 mm/pulse |
Accuracy ºë«× |
¡Ó0.05% FS, ¡Ó1 count |
Output Phase ¿é¥X¬Û |
AB phase or ABZ phase |
Electronics ¹q¸ô¯S©Ê NPN Voltage, NPN Open Collector, Push Pull or Line Driver |
¡@ |
Power Supply ¨ÑÀ³¹q·½ |
DC 8~26V, DC 5V fixed |
Current Consumption ®ø¯Ó¹q¬y |
≤ 60 mA |
Output Capacity ¿é¥X®e¶q |
Sync. Current: 20 mA, Residual Voltage: 0.5V or less |
Max. Response ³Ì¤jÂQÀ³ÀW²v |
10K Hz ~ 50K Hz |
Phase Different ¬Û¦ì®t |
A, B phase different 90¢X¡Ó45¢X (T/4¡ÓT/8), Z phase T¡ÓT/2 |
Wave Form Rise / Fall ªi§Î¤W¤U®É¶¡ |
2 £gs or less |
Polarity ·¥©Ê«OÅ@ |
Against Reverse Protection (not with DC 5V) |
MECHANICAL SPEC. |
|
Wire Specification ½u®|³W®æ |
Material: SUS304 with nylon coating |
¡@ |
Diameter: 0.6 mm; Breaking load: 16 Kg |
Max. Travel Speed ³Ì¤j©¹´_³t«× |
1,000 mm / sec. |
Vibration ¾_°Ê |
10g (10¡Ó1,500 Hz) |
Shock ½ÄÀ» |
20g per 11 ms |
Cable ¹q½u |
Ø4.5, 50 cm long |
Weight Ǧq |
< 450g |
Starting Torque on Spring ©Ô¤O |
Max. 700 g |
ENVIRONMENTAL SPEC. |
|
Operating Temp. / Humidity ¾Þ§@·Å«×/Àã«× |
0¢XC ~ 60¢XC, RH 35% ~ 90% (No Condensation) |
Storage Temp. Àx¦s·Å«× |
-20¢XC ~ 80¢XC |
Protection «OÅ@µ¥¯Å |
IP50: Dust Proof (only for encoder housing) |
Life ¹Ø©R |
Typical > 1 X 106 cycles |
ORDERING INFORMATION |
|
|